Tamping machine
≈ 6 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
09-16 CSM Tamper / Liner A tamping machine or ballast tamper, informally simply a tamper, is a self-propelled, rail-mounted machine used to position very precisely the track (rail and connected sleepers), by means of a lifting lining unit (or clamp), and stabilize the new position by packing (or tamping) the track ballast under railway tracks, by means of a group of mechanized tines. Prior to the introduction of mechanical tampers, this task was done by manual labour with the help of beaters. As well as being faster, more accurate, more efficient and less labour-intensive, tamping machines are essential for the use of concrete sleepers since they are too heavy (usually over ) to be lifted by hand. At its most basic, early tamping machines only packed the ballast. Practically all modern machines correct the alignment of the rails to make them parallel and level, in order to achieve a more comfortable ride for passengers and freight and to reduce the mechanical strain applied to the rails by passing trains. This is done by finding places where the sleepers have sunk from the weight of the passing trains or frost action, causing the track to sag. The tamper lifts each sleeper and the rails up, and packs ballast underneath. When the sleeper is laid down again, the sagged rails now sit at the proper level.…
09-16 CSM Tamper / Liner]]A tamping machine or ballast tamper, informally simply a tamper, is a self-propelled, rail-mounted machine used to position very precisely the track (rail and connected sleepers), by means of a lifting lining unit (or clamp), and stabilize the new position by packing (or tamping) the track ballast under railway tracks, by means of a group of mechanized tines. Prior to the introduction of mechanical tampers, this task was done by manual labour with the help of beaters. As well as being faster, more accurate, more efficient and less labour-intensive, tamping machines are essential for the use of concrete sleepers since they are too heavy (usually over ) to be lifted by hand. At its most basic, early tamping machines only packed the ballast. Practically all modern machines correct the alignment of the rails to make them parallel and level, in order to achieve a more comfortable ride for passengers and freight and to reduce the mechanical strain applied to the rails by passing trains. This is done by finding places where the sleepers have sunk from the weight of the passing trains or frost action, causing the track to sag. The tamper lifts each sleeper and the rails up, and packs ballast underneath. When the sleeper is laid down again, the sagged rails now sit at the proper level. Combining tamping and alignment into a single machine saves time and money, as only one machine needs to be run over the track to perform both functions. Tampers frequently work in concert with ballast regulators, as part of a section crew.
Types
Plasser and Theurer 08 rail tamping machine]] Tamper machines are built in many different varieties depending on their purpose: Plain-line tamping machines: used on line sections which have no points or other complex track structures, commonly referred to as production machines, generally have moving tamping head positions. Switch tamping machines: used to tamp switches, crossings and other complex track structures, have movable tamping heads with ability to isolate heads when required.
Specialized machines
Continuous-action tamping machines
A continuous-action tamping machine (CAT) can pack between one and four sleepers at a time, with outputs between 320 m/h and 2600 m/h generally anticipated.
Dynamic Tamping Express
The 'Tamping Express' is a machine developed by Plasser & Theurer, and in the UK and Europe is referred to as the 09-3X. This machine consists of a conventional CAT-style satellite with tooling for three sleepers in continuous succession, along with a full DTS stabilising unit suspended from the rear most vehicle in the machine.
DGS / DTS (dynamic track stabilising)
livery.]] Tamping and cleaning operations have the adverse effect of reducing the resistance of the track to lateral movement. The resistance gradually recovers with the passage of trains, but may require a speed restriction imposed for the duration. This 'consolidation' can be achieved faster and in a more controlled manner using mechanised equipment known as the dynamic track stabiliser (DTS). A DTS will normally be used only after a stretch of track has been tamped and aligned. D.G.S. has a vibrating unit which holds the track in position and applies a horizontal vibration and vertical load to simulate the passage of trains. The track parameters (or cross levels), before and after stabilising, can be viewed through bogies in the front and rear. Dynamic track stabilising has the following advantages, resulting in enhanced safety: Increases the resistance of the track to lateral movement Creates a homogenous bed of ballast Permits earlier relaxation of speed restrictions Eliminates non-uniform initial differential settlements caused by rail traffic Retains correct track geometry for a longer period than was achievable using tamping machines alone Vibration frequency: 30–35 Hz Working speed: 1–2 km/h Vertical pressure applied: The stabilisation achieved by one pass of a DGS is equal to that achieved by 100,000 tonnes of traffic, and allows a speed restriction of 20 km/h to be relaxed to 40 km/h Dynamic stabilisation is usually avoided on bridges or around overhead structures since there is a risk of damage to foundations.
See also
Ballast regulator Gandy dancer Stoneblower Track maintenance Track renewal train
External links
Audio recording of tamping machine Photos of dynamic track stabilisers in the UK Photos of tampers in the UK http://s7australia.com/system7-products/rail-tamping/
Text derived from https://en.wikipedia.org/w/index.php?oldid=1333149945 under CC BY-SA 4.0; modifications have been made.