Lesson plan
Tamping machine
09-16 CSM Tamper / Liner A tamping machine or ballast tamper, informally simply a tamper, is a self-propelled, rail-mounted machine used to position very precisely the track (rail and connected sleepers), by means of a lifting lining unit (or clamp), and stabilize the new position by packing (or tamping) the track ballast under railway tracks, by means of a group of mechanized tines. Prior to the introduction of mechanical tampers, this task was done by manual labour with the help of beaters. As well as being faster, more accurate, more efficient and less labour-intensive, tamping machines are essential for the use of concrete sleepers since they are too heavy (usually over ) to be lifted by hand. At its most basic, early tamping machines only packed the ballast. Practically all modern machines correct the alignment of the rails to make them parallel and level, in order to achieve a more comfortable ride for passengers and freight and to reduce the mechanical strain applied to the rails by passing trains. This is done by finding places where the sleepers have sunk from the weight of the passing trains or frost action, causing the track to sag. The tamper lifts each sleeper and the rails up, and packs ballast underneath. When the sleeper is laid down again, the sagged rails now sit at the proper level.…
Article summary
09-16 CSM Tamper / Liner A tamping machine or ballast tamper, informally simply a tamper, is a self-propelled, rail-mounted machine used to position very precisely the track (rail and connected sleepers), by means of a lifting lining unit (or clamp), and stabilize the new position by packing (or tamping) the track ballast under railway tracks, by means of a group of mechanized tines. Prior to the introduction of mechanical tampers, this task was done by manual labour with the help of beaters. As well as being faster, more accurate, more efficient and less labour-intensive, tamping machines are essential for the use of concrete sleepers since they are too heavy (usually over ) to be lifted by hand. At its most basic, early tamping machines only packed the ballast. Practically all modern machines correct the alignment of the rails to make them parallel and level, in order to achieve a more comfortable ride for passengers and freight and to reduce the mechanical strain applied to the rails by passing trains. This is done by finding places where the sleepers have sunk from the weight of the passing trains or frost action, causing the track to sag. The tamper lifts each sleeper and the rails up, and packs ballast underneath. When the sleeper is laid down again, the sagged rails now sit at the proper level.…
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.