traceroute
≈ 3 min read
Names in other languages
- العربيةتتبع المسار
- Češtinatraceroute
- DeutschTraceroute
- Englishtraceroute
- Españoltraceroute
- euTraceroute
- fiTraceroute
- فارسیتریس روت
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
In computing, traceroute and tracert are diagnostic command-line interface commands for displaying possible routes (paths) and transit delays of packets across an Internet Protocol (IP) network. The ping utility only computes the final round-trip times from the destination point, while route-tracing utilities can show more detail, such as the round-trip times of the packets received from each successive host (remote node) along the route to a destination and the sum of the mean times in each hop as a measure of the total time spent to establish the connection. For Internet Protocol Version 6 (IPv6), the tool sometimes has the name traceroute6 and tracert6 .
In computing, traceroute and tracert are diagnostic command-line interface commands for displaying possible routes (paths) and transit delays of packets across an Internet Protocol (IP) network. The ping utility only computes the final round-trip times from the destination point, while route-tracing utilities can show more detail, such as the round-trip times of the packets received from each successive host (remote node) along the route to a destination and the sum of the mean times in each hop as a measure of the total time spent to establish the connection. For Internet Protocol Version 6 (IPv6), the tool sometimes has the name traceroute6 and tracert6 . $ traceroute -n -w 3 -q 1 -m 16 example.com traceroute to example.com (10.99.99.99), 16 hops max, 52 byte packets 1 192.168.7.7 5.152 ms 2 192.168.7.254 12.767 ms 3 172.16.32.64 11.638 ms 4 172.16.64.128 13.193 ms 5 172.16.128.254 20.624 ms 6 10.20.30.1 56.205 ms 7 10.20.30.254 24.573 ms 8 * 9 * 10 10.99.99.1 22.810 ms 11 10.99.99.99 20.235 ms The selected arguments to the traceroute command are: -n disable name resolution -w wait for three seconds instead of default five -q send out only one query to each hop instead of default three -m limit the maximum number of hops to 16 before giving up instead of default 30 — with example.com as the final host. On line 8 and 9 (TTLs 8 and 9) it shows asterisks where the router did not respond within the timeout.
Further reading
Text derived from https://en.wikipedia.org/w/index.php?oldid=1368652592 under CC BY-SA 4.0; modifications have been made.