Lesson plan
traceroute
In computing, traceroute and tracert are diagnostic command-line interface commands for displaying possible routes (paths) and transit delays of packets across an Internet Protocol (IP) network. The ping utility only computes the final round-trip times from the destination point, while route-tracing utilities can show more detail, such as the round-trip times of the packets received from each successive host (remote node) along the route to a destination and the sum of the mean times in each hop as a measure of the total time spent to establish the connection. For Internet Protocol Version 6 (IPv6), the tool sometimes has the name traceroute6 and tracert6 .
Article summary
In computing, traceroute and tracert are diagnostic command-line interface commands for displaying possible routes (paths) and transit delays of packets across an Internet Protocol (IP) network. The ping utility only computes the final round-trip times from the destination point, while route-tracing utilities can show more detail, such as the round-trip times of the packets received from each successive host (remote node) along the route to a destination and the sum of the mean times in each hop as a measure of the total time spent to establish the connection. For Internet Protocol Version 6 (IPv6), the tool sometimes has the name traceroute6 and tracert6 .
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.