Traffic intensity

Uses your system voice; voice and rate in settings.

Snapshot

≈ 3 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

In telecommunications networks, traffic intensity is a measure of the average occupancy of a server or resource during a specified period of time, normally a busy hour. It is measured in traffic units (erlangs) and defined as the ratio of the time during which a facility is cumulatively occupied to the time this facility is available for occupancy. In a digital network, the traffic intensity is: : \frac{a L}{R} where :a is the average arrival rate of packets (e.g. in packets per second) :L is the average packet length (e.g. in bits), and :R is the transmission rate (e.g. bits per second) A traffic intensity greater than one erlang means that the rate at which bits arrive exceeds the rate bits can be transmitted and queuing delay will grow without bound (if the traffic intensity stays the same). If the traffic intensity is less than one erlang, then the router can handle more average traffic. Telecommunication operators are vitally interested in traffic intensity, as it dictates the amount of equipment they must supply.

In telecommunications networks, traffic intensity is a measure of the average occupancy of a server or resource during a specified period of time, normally a busy hour. It is measured in traffic units (erlangs) and defined as the ratio of the time during which a facility is cumulatively occupied to the time this facility is available for occupancy. In a digital network, the traffic intensity is: \frac{a L}{R} where a is the average arrival rate of packets (e.g. in packets per second) L is the average packet length (e.g. in bits), and R is the transmission rate (e.g. bits per second) A traffic intensity greater than one erlang means that the rate at which bits arrive exceeds the rate bits can be transmitted and queuing delay will grow without bound (if the traffic intensity stays the same). If the traffic intensity is less than one erlang, then the router can handle more average traffic. Telecommunication operators are vitally interested in traffic intensity, as it dictates the amount of equipment they must supply.

See also

Teletraffic engineering IEC 80000-13

References

Text derived from https://en.wikipedia.org/w/index.php?oldid=1341100452 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

No external citation was extracted for this revision. That is a statement about the source, not a claim that none exists.