Lesson plan
Traffic intensity
In telecommunications networks, traffic intensity is a measure of the average occupancy of a server or resource during a specified period of time, normally a busy hour. It is measured in traffic units (erlangs) and defined as the ratio of the time during which a facility is cumulatively occupied to the time this facility is available for occupancy. In a digital network, the traffic intensity is: : \frac{a L}{R} where :a is the average arrival rate of packets (e.g. in packets per second) :L is the average packet length (e.g. in bits), and :R is the transmission rate (e.g. bits per second) A traffic intensity greater than one erlang means that the rate at which bits arrive exceeds the rate bits can be transmitted and queuing delay will grow without bound (if the traffic intensity stays the same). If the traffic intensity is less than one erlang, then the router can handle more average traffic. Telecommunication operators are vitally interested in traffic intensity, as it dictates the amount of equipment they must supply.
Article summary
In telecommunications networks, traffic intensity is a measure of the average occupancy of a server or resource during a specified period of time, normally a busy hour. It is measured in traffic units (erlangs) and defined as the ratio of the time during which a facility is cumulatively occupied to the time this facility is available for occupancy. In a digital network, the traffic intensity is: : \frac{a L}{R} where :a is the average arrival rate of packets (e.g. in packets per second) :L is the average packet length (e.g. in bits), and :R is the transmission rate (e.g. bits per second) A traffic intensity greater than one erlang means that the rate at which bits arrive exceeds the rate bits can be transmitted and queuing delay will grow without bound (if the traffic intensity stays the same). If the traffic intensity is less than one erlang, then the router can handle more average traffic. Telecommunication operators are vitally interested in traffic intensity, as it dictates the amount of equipment they must supply.
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.