Transient hot wire method

Uses your system voice; voice and rate in settings.

Snapshot

≈ 3 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

The transient hot wire method (THW) is a technique for measuring the thermal conductivity of gases, liquids, solids, nanofluids and refrigerants in a wide temperature and pressure range. The technique is based on recording the transient temperature rise of a thin vertical metal wire with infinite length when a step voltage is applied to it.

The wire is immersed in a fluid and can act both as an electrical heating element and a resistance thermometer. The transient hot wire method has advantage over the other thermal conductivity methods, since there is a fully developed theory and there is no calibration or single-point calibration.

Furthermore, because of the very small measuring time (1 s) there is no convection present in the measurements and only the thermal conductivity of the fluid is measured with very high accuracy. Most transient hot wire sensors used in academia consist of two very thin wires that differ in length but are otherwise identical.

Sensors using a single wire are used both in academia and industry with the advantage over the two-wire sensors in the ease of handling of the sensor and change of the wire. An ASTM standard has been published for the measurement of engine coolants using a single-transient hot wire method.

The transient hot wire method (THW) is a technique for measuring the thermal conductivity of gases, liquids, solids, nanofluids and refrigerants in a wide temperature and pressure range. The technique is based on recording the transient temperature rise of a thin vertical metal wire with infinite length when a step voltage is applied to it.

The wire is immersed in a fluid and can act both as an electrical heating element and a resistance thermometer. The transient hot wire method has advantage over the other thermal conductivity methods, since there is a fully developed theory and there is no calibration or single-point calibration.

Furthermore, because of the very small measuring time (1 s) there is no convection present in the measurements and only the thermal conductivity of the fluid is measured with very high accuracy. Most transient hot wire sensors used in academia consist of two very thin wires that differ in length but are otherwise identical.

Sensors using a single wire are used both in academia and industry with the advantage over the two-wire sensors in the ease of handling of the sensor and change of the wire. An ASTM standard has been published for the measurement of engine coolants using a single-transient hot wire method.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1364171573 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

4 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.