Lesson plan
Transient hot wire method
The transient hot wire method (THW) is a technique for measuring the thermal conductivity of gases, liquids, solids, nanofluids and refrigerants in a wide temperature and pressure range. The technique is based on recording the transient temperature rise of a thin vertical metal wire with infinite length when a step voltage is applied to it. The wire is immersed in a fluid and can act both as an electrical heating element and a resistance thermometer. The transient hot wire method has advantage over the other thermal conductivity methods, since there is a fully developed theory and there is no calibration or single-point calibration. Furthermore, because of the very small measuring time (1 s) there is no convection present in the measurements and only the thermal conductivity of the fluid is measured with very high accuracy. Most transient hot wire sensors used in academia consist of two very thin wires that differ in length but are otherwise identical. Sensors using a single wire are used both in academia and industry with the advantage over the two-wire sensors in the ease of handling of the sensor and change of the wire. An ASTM standard has been published for the measurement of engine coolants using a single-transient hot wire method.
Article summary
The transient hot wire method (THW) is a technique for measuring the thermal conductivity of gases, liquids, solids, nanofluids and refrigerants in a wide temperature and pressure range. The technique is based on recording the transient temperature rise of a thin vertical metal wire with infinite length when a step voltage is applied to it. The wire is immersed in a fluid and can act both as an electrical heating element and a resistance thermometer. The transient hot wire method has advantage over the other thermal conductivity methods, since there is a fully developed theory and there is no calibration or single-point calibration. Furthermore, because of the very small measuring time (1 s) there is no convection present in the measurements and only the thermal conductivity of the fluid is measured with very high accuracy. Most transient hot wire sensors used in academia consist of two very thin wires that differ in length but are otherwise identical. Sensors using a single wire are used both in academia and industry with the advantage over the two-wire sensors in the ease of handling of the sensor and change of the wire. An ASTM standard has been published for the measurement of engine coolants using a single-transient hot wire method.
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.