Trap bar

Uses your system voice; voice and rate in settings.

Snapshot

≈ 4 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

The trap bar (also referred to as the hex bar) is an implement used in weight training. It is an assemblage of bars bent into an angle, then welded into a shape which lies flat in a plane, consisting of: # A barstock welded into a hexagonal or diamond shape, sized to allow a person to stand in the middle # Two (almost always) coaxial stub bars, welded to opposing positions on the outside of the perimeter of the hollow portion to hold weight plates. The stubs are used for loading the trapbar with plates. # A set of handles pointing forward and back are welded inside the hollow portion. The handles are used to hold the trapbar while an exercise is performed. Note that these handles are aligned at a 90-degree angle to the plate-loading bars. The trap bar was invented, patented and trademarked by Al Gerard, a competitive powerlifter. It is often thought to have been named after the (upper fibres of the) trapezius muscles, the muscle it was designed to train, with shoulder shrugs. In addition to shrugs, the bar is also used for trapbar deadlift, trapbar jumps, overhead/military presses, upright rows or "high pulls," and stiff leg deadlifts. Its design has since changed from various original designs into a hexagonal shape, and can be correctly referred to as a "hex bar". Variants are produced by several vendors.

The trap bar (also referred to as the hex bar) is an implement used in weight training. It is an assemblage of bars bent into an angle, then welded into a shape which lies flat in a plane, consisting of: A barstock welded into a hexagonal or diamond shape, sized to allow a person to stand in the middle Two (almost always) coaxial stub bars, welded to opposing positions on the outside of the perimeter of the hollow portion to hold weight plates. The stubs are used for loading the trapbar with plates. A set of handles pointing forward and back are welded inside the hollow portion. The handles are used to hold the trapbar while an exercise is performed. Note that these handles are aligned at a 90-degree angle to the plate-loading bars. The trap bar was invented, patented and trademarked by Al Gerard, a competitive powerlifter. It is often thought to have been named after the (upper fibres of the) trapezius muscles, the muscle it was designed to train, with shoulder shrugs. In addition to shrugs, the bar is also used for trapbar deadlift, trapbar jumps, overhead/military presses, upright rows or "high pulls," and stiff leg deadlifts. Its design has since changed from various original designs into a hexagonal shape, and can be correctly referred to as a "hex bar". Variants are produced by several vendors.

References

Text derived from https://en.wikipedia.org/w/index.php?oldid=1367030767 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

1 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.