XBC

robot

Uses your system voice; voice and rate in settings.

≈ 3 min read

Cite, export and learn8 citation formats · 8 exports · lesson and quiz

Names in other languages

  • DeutschXBCXport Botball Controller
  • EnglishXBCXport Botball Controller, Interactive C

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

The XBC, or the Xport Botball Controller, is a robot based on Charmed Labs'[1] Xport[2] hardware. It was built specifically for the Botball competition and uses a Game Boy Advance for its display and for high-level processing; a field-programmable gate array is used to offload low-level processing of motors and sensors from the Game Boy Advance. The XBC is programmed using Interactive C, which is a variant of the C programming language. The XBC replaced the RCX in 2005 as Botball's official processor. The RCX can be programmed using Interactive C, Not Quite C, or Lego's simple GUI interface. Both robots can have bases built with Lego pieces.

Sensors

edit edit source

The XBC has ports for LEDs/light sensors, IR reflection/color sensors, SONAR, and touch sensors. A camera can also be connected via a header pin array on the front of the XBC; it can blob-track or serve as a color sensor. The camera's live feed can be displayed on the GBA's screen.

Servos and Motors

edit edit source

The XBC has 4 motor ports and 4 servo ports, each labeled 0-3, respectively. Each motor can be independently programmed to go either backwards or forwards and each servo can be independently changed and controlled with precision. Servos and motors are powered by a separate battery pack from the Game Boy Advance.

Programming

edit edit source

The XBC can be programmed using either Interactive C (IC) or the Xport Development Kit (Xport DK). IC is a simplified variant of C, which is intended to be as easy as possible to use. The Xport DK, in contrast, is a full-blown C/C++ cross-compiler. IC has many feature limitations that are not present in the Xport DK; this is in part a result of the fact that IC was originally written for the Handy Board (which had much fewer features), not the XBC. Some limitations of IC include a 16KiB compiled program size limit, and the lack of features for graphics and sound. The Xport DK was originally designed to program the Xport Robot Controller (XRC - the predecessor of the XBC), and supports the XBC as well. The Xport DK does not have the same limitations of IC, but has its own problem - an almost complete lack of documentation. Because IC is significantly easier to use, has extensive documentation for most features, and is still powerful enough for most uses, the vast majority of XBC users program in IC.

References

edit edit source
  1. ^ Charmed Labs' Wikipedia revision 1335981907, retrieved 2026-11-18
  2. ^ Xport Wikipedia revision 1335981907, retrieved 2026-11-18
edit edit source

Text derived from https://en.wikipedia.org/w/index.php?oldid=1335981907 under CC BY-SA 4.0; modifications have been made.

Words in each sectionProgrammingProgrammingProgramming: 186 words186SensorsSensorsSensors: 56 words56Servos and MotorsServos and MotorsServos and Motors: 55 words55
Words in each section. Measured from the stored article body; sections below the minimum are not plotted.

Provenance

snapshot xbc-905373-8192e5a95bb7a56d · hash 8192e5a95bb7a56d058c553d410f22cc83c1a402f837bf1691102f388e333406 · captured 2026-02-01 · ledger · version history

Cite this page as: encyclopegia.org, “XBC”, snapshot xbc-905373-8192e5a95bb7a56d. https://encyclopegia.org/a/xbc