Zero Reference Model
In Robotics engineering, Zero Reference Model (ZRM) is a method for describing the kinematics of a serial manipulator, alternative to the Denavit-Hartenberg parameters (DH).
≈ 4 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
In Robotics engineering, Zero Reference Model (ZRM) is a method for describing the kinematics of a serial manipulator, alternative to the Denavit-Hartenberg parameters (DH). It was introduced by Gupta in 1981.[1][2] with the name Zero Reference Position Description.
Some authors claim that ZRM is superior to DH, for example in the case of geometric parameters calibration [3]
Zero Reference Model
edit edit sourceThe basic principle of ZRM consists in describing the location of the robot joints and their rotation/translation axes, in the base coordinate system, when all joint values are equal to zero. Gupta presents the ZRM for a serial manipulator as a table with four columns containing:
- The joint number i and its type (R for rotational and P for prismatic)
- The joint direction as a vector u0i
- The joint center as a position Q0i
- The Hand Data as a position Q0h and two orthogonal vectors u0a (direction of gripping) and u0t (direction of the gripper tongs)
The ZRM table for a simple serial manipulator with 6 joints is shown below:
|
Joint nb i, |
Joint dir u0i |
Joint pos Q0i |
Hand data |
|---|---|---|---|
|
1, R |
(0, 0, 1) |
(0, 0, 0) |
Q0h = (b + c + d + e + f, 0, a) |
|
2, R |
(0, 1, 0) |
(0, 0, a) |
|
|
3, R |
(0, 1, 0) |
(b, 0, a) |
|
|
4, R |
(1, 0, 0) |
(b + c, 0, a) |
|
|
5, R |
(0, 1, 0) |
(b + c + d, 0, a) |
|
|
6, R |
(1, 0, 0) |
(b + c + d + e, 0, a) |
The transformation of the hand with respect to the base is calculated as follows:
[T]=[T01].[T12]...[Tn−1n].[Tnh]
Each individual transformation Ti−1i is the combination of the translation Qi−1i and the rotation Ri−1i with:
- For a rotative joint: Qi−1i=Q0i−Q0i−1 and Ri−1i=Rot(qi,u0i)
- For a prismatic joint: Qi−1i=(Q0i−Q0i−1)+qi.u0i and Ri−1i=Id
The transformation [Tnh] is given as:
[Tnh]=(u0t×u0au0tu0aQ0h−Q0n0001)
Discussion
edit edit sourceWhile the ZRM representation is not as compact as the DH parameters, it has a number of advantages:
- It is really straightforward and less error-prone, e.g. when describing the kinematics of a manipulator from the vendor documentation.
- It leads to simple calculations, especially when using unitary quaternions for the rotations, as Rij=cos(qj2)+sin(qj2).(ui0xi+ui0yj+ui0zk)
A more compact form can be obtained by using Qi−1i instead of Q0i in the third column, and a position and quaternion in the fourth. The table above becomes:
|
Joint nb i, |
Joint dir ui−1i |
Joint pos Qi−1i |
Hand data |
|---|---|---|---|
|
1, R |
(0, 0, 1) |
(0, 0, 0) |
Q6h = (f, 0, 0) |
|
2, R |
(0, 1, 0) |
(0, 0, a) |
|
|
3, R |
(0, 1, 0) |
(b, 0, 0) |
|
|
4, R |
(1, 0, 0) |
(c, 0, 0) |
|
|
5, R |
(0, 1, 0) |
(d, 0, 0) |
|
|
6, R |
(1, 0, 0) |
(e, 0, 0) |
The ZRM of a serial manipulator can be described even if the manipulator cannot reach the zero value on all joints because of mechanical limitations.
References
edit edit source- ^ Gupta, Krishna C. (1984). A note on position analysis of manipulators. Mechanism and Machine Theory, Volume 19, Issue 1, 1984, Pages 5-8. doi:10.1016/0094-114X(84)90003-X
- ^ Gupta, Krishna C. (1986). Kinematic Analysis of Manipulators Using the Zero Reference Position Description. The International Journal of Robotics Research, 5, 13 - 5. doi:10.1177/027836498600500202
- ^ Wen, Xiulan; Wang, Dongxia; Zhao, Yibing; Kang, ChuanShuai; Zhang, Yin; Lv, Zhongyan (2019). A comparative study of MDH and zero reference model for geometric parameters calibration to enhance robot accuracy. Proc. SPIE 11343, Ninth International Symposium on Precision Mechanical Measurements, 113430B (13 November 2019). doi:10.1117/12.2544252
Text derived from https://en.wikipedia.org/w/index.php?oldid=1376271490 under CC BY-SA 4.0; modifications have been made.